New Dual Co2 Regulator for Kegerator with Tank Wrench & New Adjustable Dual Tap Kegerator Tower Beer Tap Tower with 1/4" Barb

New Dual Co2 Regulator & Adjustable Beer Tap Tower

• Easy-Adjust Knob and Safety Relief Valve: The two-stage CO₂ regulator displays cylinder pressure from 0-3000 PSI on the left gauge, while the two top gauges show keg CO₂ pressure from 0-60 psi respectively. The regulator knob turns smoothly for precise micro-adjustments of CO₂ pressure between 0-50 psi. Use this CO₂ keg regulator to effortlessly carbonate beer. The safety relief valve automatically releases keg pressure when it reaches approximately 45–50 psi (Note: This is not a leakage issue).
• Premium Material & No Leakage:The beer regulator is Heavy-duty chrome-plated brass body.The Kegerator regulator CO2 comes with CGA320 sealing washers, ensuring a secure and leak-free connection. Always place a washer between the lock-down nut and the CO2 tank for a tight seal.(Note: Always check beforehand whether a white gasket is installed at the single-gauge connection point. Ensure one white gas washer is inserted before connecting the regulator to the cylinder to prevent gas leakage).
• Anti-loss design: This wrench is specifically designed for tightening/loosening CO₂ and soda dispensers. After use, simply hang the wrench on the pressure regulator. When removing regulator, loop the cord around the cylinder for easy access whenever needed—no more searching. Whether for daily fine-tuning or full cylinder replacement, it ensures efficient operation and eliminates tedious handling. Simply wipe clean after use and store in a dry place to extend its lifespan and effectively prevent
• Independent Adjustment: Equipped with independent adjustment knobs, allowing separate pressure settings for each gas line while simultaneously and accurately monitoring the working pressure of both systems. The CO₂ cylinder pressure can be quickly shut off via the shut-off valve. (Note: Before use, ensure all valves and tank are closed. After connect the tank, first open the 90° switch, then slowly adjust the adjustment knobs. Fine-tune the keg pressure during operation to prevent gauge damage.)
• Rotating Threaded End Fitting:The regulator can be fitted with either a 1/4“ O.D and 5/16” O.D barb fitting as needed, for connecting hoses with 1/4“ I.D and 5/16” I.D.This dual tap regulator is commonly used with double-tap beer towers, D-couplers, gas splitters. It is suitable for brewing beer, and carbonating beverages in home, restaurant, or commercial bar settings.